Click to close
the difference between Lamin-x Clear Bra kits and other paint protection/clear
bra products I find?
Our clear bra kits are of the exact same material with high-quality, strength,
and warranty that you will find elsewhere.
We focus on providing these high-quality clear bra kits at a great price
for you DIY customers or professional installers that have the ability to
install them successfully.
Can I install the paint protection myself?
Due to each kits size, complexity, and general PITA factor, the clear
bra kits are best installed by professionals. However, it can be done by those
customers who are mechanically inclined, patient, and have an extra person for
help with handling the large pieces of film. We include website videos, installation
instructions, and application tools with your order. If problems or questions arise during your
installation, you can contact us at 706-955-0677 our customer service
associates would be happy assist you.
If I have the film installed by a professional, how much will it cost?
The cost for installation varies per shop.
Since each shop has their own rates and will install at different
speeds, it is difficult to estimate installation cost. Make sure to contact
your local dealers to get a quote for the install before purchasing or
How long will it take to get my Lamin-x?
Precut orders are custom manufactured for you at time of ordering.
Please allow 2-4 workday's processing time, and at least 2-10 days for delivery
after the product has been shipped. You are responsible to make prior
arrangement with the carrier if you are not available to receive and sign for
the product. Lamin-x is not responsible if the product is verified as delivered
with the carrier to the specified address, but you personally did not receive
What is your warranty?
We have a Five-Year Warranty on our products. If you want more information
please visit our warranty page.
What do I do if I find fogginess, air or water bubbles, surface texture, or
scratches after my Lamin-x installation?
Once the film fully cures, most imperfections will disappear completely. After
time, small scratches, trapped moisture, and most bubbles will dissipate on
their own. However, if you encounter a stubborn bubble, you can poke it with a
sewing needle and push out the air or water. The hole will eventually close on
How do I remove the film from my paint?
To remove the film, we recommend warming it with a heat gun, hair dryer, or
simply by parking the car in the sunlight on a warm day. While the film is
warm, slowly peel the film from the paint surface. Any adhesive that may be
left on the paint can be removed with a cleaner that is safe for use on your
vehicle's exterior. We recommend using
Goo Gone or bug and tar remover.
How to I take care of the film after install?
You can find information on care instructions on our maintenance care page.