BMW 3-Series (82-91) Blue U.S. Lighting Covers
2-3 Business Days
Precut orders are custom manufactured for you at time of ordering. Please allow 1-3 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.
What is your warranty?
We have a Five-Year Warranty on our products. If you want more information please visit our warranty page.
Can I install Lamin-x film myself?
Yes, you can install Lamin-x yourself. We have provided installation difficulty ratings on all of our products. We make every effort to assure that all precut products are rechecked for fitment suitability on each make & model advertised. A "professional quality" installation (especially on level 4 or 5 install) will require some acquired knowledge and mechanical ability in which we cannot be held accountable. Therefore installations are done at your risk. We provide you with installation instructions, tools, and website videos. I
What do I do if I find fogginess, air or water bubbles, surface texture, or scratches after my installation?
Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.
How do I remove the film from lights?
To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the lens surface. Any adhesive that may be left on the lens can be removed with a cleaner that is safe for use on your vehicle's exterior. We recommend using Goo Gone or bug and tar remover.
What is the difference between Lamin-x and cheap similar products I find?
This is the perfect example of a "you get what you pay for" situation. Typically, the inexpensive knock-off films are extremely thin, not as pliable, use a sub-par adhesive, or fade in color. Lamin-x is the complete opposite: Glossy finish, strong, yet forgiving adhesive, impact protection, and a five year warranty. Even better yet, we make all of our products right here in the USA.
Can I just purchase one side?
You may purchase one side or light, but we will have to place the custom order for you. You can call us at (706) 955-0677 to place the order, or send us an email with your request. We will then place the order for you and send you a PayPal payment request.
Are these films legal in my state?
Our colored films may not be legal for street use on a vehicle's primary lighting, and, as such, are sold with an off-road use disclosure. Please check your state or local laws before installation. Application of colored Lamin-x film on your primary lights is done so at your own risk.
How to I take care of the film after install?
You can find information on care instructions on our maintenance care page.
All films are adhesive-backed for peel n' stick - tools included in order
Optically transparent, glossy variety of clear and color film options
5-year Lamin-x product warranty
Thick enough to protect lenses from daily abuse and wear
Buy precut covers or custom apply Lamin-x with Universal Sheets or Rolls