Porsche 911 Carrera (12-16) Blue DRL Covers

Installation Difficulty
Made in USA
Five-Year Warranty
Free Shipping Orders $75+
In stock
SKU
P119B
$19.95

Ships:

2-3 Business Days

Lamin-x Blue DRL Film Covers for your Porsche 911 Carrera (2012, 2013, 2014, 2015, 2016) are designed to give you a one of a kind combination of style and protection. Our blue film overlay gives your fog lamps a blue look when unlit, but when combined with halogen lights it will produce a whitish light when lit. These covers are custom pre-cut to fit both the left and right sides of your fog lamps.

Our driving light films are made from impact-resistant 12 mil protective film with adhesive-backing to protect your lights from cloudiness that occurs over time and road debris. The adhesive on our films are designed to be extremely forgiving. You can apply numerous times during initial application to get the installation right. This is a DIY easy installation. Order today!
More Information
FAQ How long will it take to get my Lamin-x?
Precut orders are custom manufactured for you at time of ordering. Please allow 1-3 workday's processing time, and at least 2-10 days for delivery after the product has been shipped. You are responsible to make prior arrangement with the carrier if you are not available to receive and sign for the product. Lamin-x is not responsible if the product is verified as delivered with the carrier to the specified address, but you personally did not receive it.


What country do you create your precut patterns from?
Our precut kits are designed from USA based and sold vehicles. If you are an international customer, please be aware that your vehicle may be different than USA models. Some examples of the differences include; year spans of a model, lights shapes or sizes, trim levels naming, etc... Please compare your model to USA designated models before ordering your precut kit.


What is your warranty?
We have a Five-Year Warranty on our product. If you want more information please visit our warranty page.

Can I install Lamin-x film myself?
Yes, you can install Lamin-x yourself. We have provided installation difficulty ratings on all of our products. Most DRL installations are low difficulty at level 1 or 2. A few vehicles have higher difficulty levels that require some acquired knowledge and mechanical ability. For these installations, if you are not comfortable installing, we recommend using our Dealer Locator and contacting your local installer. If you attempt the install yourself and have any questions, contact us at 706-955-0677 or help@lamin-x.com.

What do I do if I have fogginess, air or water bubbles, surface texture, or scratches after my installation?
Once the film fully cures, most imperfections will disappear completely. After time, small scratches, trapped moisture, and most bubbles will dissipate on their own. However, if you encounter a stubborn bubble, you can poke it with a sewing needle and push out the air or water. The hole will eventually close on its own.

How do I remove the film from lights?
To remove the film, we recommend warming it with a heat gun, hair dryer, or simply by parking the car in the sunlight on a warm day. While the film is warm, slowly peel the film from the lens surface. Any adhesive that may be left on the lens can be removed with a cleaner that is safe for use on your vehicle's exterior. We recommend using Goo Gone or bug and tar remover.

What is the difference between Lamin-x and cheap similar products I find?
This is the perfect example of a "you get what you pay for" situation. Typically, the inexpensive knock-off films are extremely thin, not as pliable, use a sub-par adhesive, or don't maintain color. Lamin-x is the complete opposite: Glossy finish, strong, yet forgiving adhesive, impact protection, and a five year warranty. Even better yet, we make all of our products right here in the USA.

Will the Lamin-x film discolor or burn?
We have seen occasional cases in which the film and/or adhesive discolors due to high DRL temperatures. If this occurs, please send photos so we can verify the concern; this may be covered under our 5 year warranty. We recommend only having the DRLs on while the vehicle is in motion, as the airflow will help to cool the lens surface. Leaving the DRLs on while the vehicle is parked can create too much heat and cause the adhesive to burn/discolor.

Are these films legal in my state?
Our colored films may not be legal for street use on a vehicle's primary lighting. DRLs or auxiliary lights are not typically considered primary lights. However we recommend consulting any local laws before purchasing and installing on primary lights. Application of colored Lamin-x film on your primary lights is done so at your own risk.

How to I take care of the film after install?
You can find information on care instructions on our maintenance care page.
Write Your Own Review
You're reviewing:Porsche 911 Carrera (12-16) Blue DRL Covers
Your Rating

Transparent protection film that adheres to your fog or driving lights

Protects against rock damage, sand-blasting, or cloudiness

Precut for both sides of your specific vehicle

Includes DIY peel and stick installation instructions

Made in USA, 5-year warranty, industry-leading product